Internal Mini SAS HD SFF-8643 to SFF-8087 (36Pin) Cable

Key attributes 

About this item

Mini SAS HD SFF-8643 to Mini SAS SFF-8087 (36Pin) Cable, Length: 0.5-meter(1.6ft), AWG 30, 2 Pack
Internal Mini SAS Cable adopts advanced Twin Axial Cable Technology and makes it Thin, High-bandwidth, and Low-skew.
Impedance = 100 Ohms, Support data rates at 12 Gbps. Fully compliant with the latest SAS 2.1 AND SAS 3.0 interface specifications.
Widely Application: Servers, RAID systems, Storage systems, SAS/SATA HBA interfaces, Direct-attached storage (DAS).
Mini SAS SFF-8643 to Mini SAS SFF-8087 Cable is a new generation of high-density interface, small size, and saves the equipment space, bandwidth is wider and larger capacity, and faster data transfer.

HD Mini SAS SFF-8643 to Mini SAS SFF-8087

Compatible with 12Gbps SAS drives and backward compatible with 6Gbps SAS and SATA drives
Cost-effective replacement cable
Guaranteed reliability with a lifetime warranty

Description

Compatible branded servers

1. Dell: 0XJ8K4

2. Supermicro:~0.5m CBL-0159L/~1m   CBL-0160L

Application data/communication

1. RAID (Redundant Array of Independent Disks)
2. Workstation
3. Rack Server
4. Server
5. Storage shelf

Features and benefits

1. The sending rate is 12 Gbps.
2. Comply with SAS3.0 revision 5a specification.

Mechanical behavior

1. Fit and non-fit
2. Conditions: EIA 364-13. Insert and extract at a speed of 25 mm/min.
3. Mating power: 100N maximum.
4. Relieving force: 50 nautical miles maximum. 

Signal integrity

1. Matching connector impedance: 100 ohm ± 15%
2. Absolute cable impedance: 100 ohms ± 10%
3. Cable pair matching: ±5 ohm
4. Common mode impedance: 25 to 40 ohms
5. Insertion loss: -6Db up to 4.5Ghz; 11Db up to 9Ghz
6. Crosstalk: -35dB up to 6GHz

Product environmental regulations

Rohs2.0: compatible
China Human Rights Association: Yes
REACH SVHC: Yes

Electrical performance

• Contact current rating

0.5 The maximum ampere per needle when mating.

• Voltage level

30 volts per contact when mating or not mating.

• Contact resistance

After the stress test, the maximum initial is 30 mΩ, and the maximum is 15 mΩ.

• Withstand medium voltage

500 volts, no failure in 1 minute.

• Insulation resistance

At least 1000 moms.