Cat6a Industrial Ethernet Bulk Cable, 1000ft (305m), 26AWG Stranded Pure Bare Copper Wire, 750MHz, Shielded (S/FTP), PUR, with Reel
The Cat6a was developed to achieve maximum distance of 100 meters for full 10 Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not.
● Product origin: China
● Delivery time: 7 -10 workdays
We are manufacturer that could support you good quality with aggressive price. Believe that we are the best choice for you from many traders and resellers.
Accepted OEM/ ODM
Welcome to send us any of your questions and inquiries, we are more than pleasure to send you more information.
The Cat 6A industrial S/FTP copper cable is constructed of 26/7AWG stranded copper conductors with HDPE polyethylene insulation. All four pairs are surrounded by an overall braided shield and metallic foil and covered with an Oil and UV Resistance (PUR) jacket. It's ideal for industrial applications and harsh environments.
| Cable Type | Category 6a | Shielding Type | S/FTP |
| Cable jacket | PUR | Cable Length | 1000ft(305m) |
| Reference Bandwidth | 750MHz | Data Rate Support | 1G/10GBase-T |
| Wire Gauge | 26AWG | Conductor Type | Pure Bare Copper Wire |
| Putup Type | Reel | Cable Outer Diameter (mm) | 6.40+0.30mm |
| Number of conductors | 4 Pairs | Bend Radius (mm) |
25.2
|
| Maximum installation Tension (N) |
60N | Standard | ISO/IEC 11801-1-1 |
| Operating Temperature | -40 to 80°C (-40 to 176°F) | Installation Temperature | -20 to 60°C (-4 to 140°F) |
Q1: Can Cat6a cables be bent during installation?
A1: Yes, but excessive bending or pulling may damage internal conductors.
It’s recommended to follow the minimum bend radius and avoid excessive force during installation.
Q2: Can I terminate Cat6a cable with Cat6 connectors?
A2: Technically yes, but not recommended. Using non-Cat6a connectors may: Reduce performance & Increase failure risk over time.
Q3: Is shielding necessary for industrial Ethernet cables?
A3: Yes, shielding is critical in industrial environments to reduce EMI/RFI interference and ensure stable transmission.
Q4: Do shielded cables need grounding?
A4: In most industrial setups, grounding is recommended for optimal shielding performance, while improper grounding may reduce its effectiveness.
Q5: Is bulk cable better than pre-made patch cables?
A5: Yes for large projects: More cost-effective,Custom length flexibility,Suitable for structured cabling
